Loading EV catalog…

Tip: type Model Y vs Mach-E to compare any two EVs instantly Open full Compare Workbench →
Ford Mustang Mach-E · High-Voltage Contactor (HVBJB)

Ford Mustang Mach-E HVBJB Contactor & Battery Recalls

Updated

NHTSA Record Summary

5 NHTSA recall campaigns on file across 2021–2025 model years + 1 open NHTSA probe

TrimIndex tracks 5 key NHTSA recall campaigns (22V412000, 23V687000, 25V130000, 25V441000, 26V582000) covering up to 84,637 total campaign units across 2021–2025 model years (NHTSA filings through Nov 12, 2026). NHTSA also lists 1 active federal defect investigation (EA25001). Avoid flagged: Ford Mustang Mach-E (2021). Cleanest judged year: 2024 Ford Mustang Mach-E.

Covers NHTSA recall campaigns involving the Mustang Mach-E high-voltage battery main contactors (HVBJB), battery control software and 12-volt battery systems across 2021–2026 model years.

Data:NHTSA through

Matched NHTSA Recalls

5

Campaigns on file

Affected Model Years

2021–2025

Verify exact VIN window

Advisory Warnings

0

Park-Outside / Do-Not-Drive

Total Campaign Units

84,637

Sum across NHTSA filings

01 · Official NHTSA Filings

Matched NHTSA recall campaigns & build windows

Every summary, consequence and remedy below quotes NHTSA’s recall filing directly (files through Nov 12, 2026).

NHTSA 22V412000

Ford Mustang Mach-E · Model Years 2021, 2022

Filed Jun 10, 2022

48,924 potentially affected units

Component: ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY:MANAGEMENT SYSTEM/ENERGY CONTROL MODULE (BMS/BECM):SOFTWARE

Defect summary (NHTSA): Ford Motor Company (Ford) is recalling certain 2021-2022 Mustang Mach-E vehicles. The high voltage battery main contactors may overheat.

Safety consequence (NHTSA): An overheated high voltage battery contactor may cause the vehicle to lose drive power, increasing the risk of a crash.

Remedy (NHTSA): Dealers will update the on-board software, free of charge. Owner notification letters were mailed on July 8, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S41.

NHTSA build windows: 2021 (not stated) · 2022 (not stated)
NHTSA 23V687000

Ford Mustang Mach-E · Model Years 2021, 2022

Filed Oct 13, 2023

34,762 potentially affected units

Component: ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY:MANAGEMENT SYSTEM/ENERGY CONTROL MODULE (BMS/BECM)

Defect summary (NHTSA): Ford Motor Company (Ford) is recalling certain 2021-2022 Mustang Mach-E vehicles equipped with an extended range battery. The high voltage battery main contactors may overheat.

Safety consequence (NHTSA): An overheated high voltage battery contactor can result in a loss of drive power, increasing the risk of a crash.

Remedy (NHTSA): Dealers will replace the high voltage battery junction box, free of charge. Owner notification letters were mailed December 29, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S56. Vehicles included in this recall that were previously repaired under recall 22V-412 will need to have the new remedy completed.

NHTSA build windows: 2021 (not stated) · 2022 (not stated)
NHTSA 25V130000

Ford Mustang Mach-E · Model Years 2021, 2022

Filed Feb 28, 2025

626 potentially affected units

Component: ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY:MANAGEMENT SYSTEM/ENERGY CONTROL MODULE (BMS/BECM):SOFTWARE

Defect summary (NHTSA): Ford Motor Company (Ford) is recalling certain 2021-2022 Mustang Mach-E vehicles previously repaired incorrectly under recall number 22V-412. The high voltage battery main contactors may overheat.

Safety consequence (NHTSA): An overheated high voltage battery contactor may cause the vehicle to lose drive power, increasing the risk of a crash.

Remedy (NHTSA): Dealers will update the on-board software, free of charge. Owner notification letters were mailed April 11, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S14.

NHTSA build windows: 2021 (not stated) · 2022 (not stated)
NHTSA 25V441000

Ford Mustang Mach-E · Model Year 2022

Filed Jun 27, 2025

239 potentially affected units

Component: ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY:MANAGEMENT SYSTEM/ENERGY CONTROL MODULE (BMS/BECM)

Defect summary (NHTSA): Ford Motor Company (Ford) is recalling certain 2022 Mustang Mach E vehicles equipped with an extended range battery. The high voltage battery main contactors may overheat.

Safety consequence (NHTSA): An overheated high voltage battery contactor can result in a loss of drive power, increasing the risk of a crash.

Remedy (NHTSA): Dealers will replace the high voltage battery junction box, free of charge. Owner notification letters were mailed July 10, 2025. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 23S56. This recall is an expansion of previous NHTSA recall number 23V687.

NHTSA build windows: 2022 (2022-05-25 to 2022-05-27)
NHTSA 26V582000 Filed while remedy pending

Ford Mustang Mach-E · Model Years 2023, 2024, 2025

Filed Sep 9, 2026

86 potentially affected units

Component: ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY:MANAGEMENT SYSTEM/ENERGY CONTROL MODULE (BMS/BECM):SOFTWARE

Defect summary (NHTSA): Ford Motor Company (Ford) is recalling certain 2023-2025 Mustang Mache E vehicles that received a new Battery Energy Control Module (BECM) during a prior repair. The battery energy control module software may cause an incorrect state of charge to display in the vehicle, or lead to an increased risk of a high voltage battery fire after repeated DC Fast Charging cycles.

Safety consequence (NHTSA): An inaccurate state-of-charge reading can lead to an unexpected loss of drive power, increasing the risk of crash. Additionally, a high voltage battery fire increases the risk of injury.

Remedy (NHTSA): Dealers will update the BECM software, free of charge. Interim letters, notifying owners of the safety risk, were mailed September 18, 2026. Additional letters will be sent once the remedy is available, anticipated in December 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S68. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on September 9, 2026.

NHTSA build windows: 2023 (2023-07-03 to ?) · 2024 (not stated) · 2025 (? to 2025-08-26)

02 · Model-Year Exposure

Complaints, recalls & TrimIndex standing by model year

Model & Year Standing Total NHTSA Complaints Related Theme Complaints Recalls on File
2026 Ford Mustang Mach-E → Too new 2 None grouped 2
2025 Ford Mustang Mach-E → Too new 14 3 loss of drive power 7
2024 Ford Mustang Mach-E → Best year 49 8 loss of drive power 5
2023 Ford Mustang Mach-E → Judged 129 22 loss of drive power 6
2022 Ford Mustang Mach-E → Judged 142 47 loss of drive power, the 12-volt battery dying 9
2021 Ford Mustang Mach-E → Avoid 353 102 loss of drive power, the car going dead or not starting 13

03 · Verbatim Owner Filings

What owners reported directly to NHTSA

2021 Ford Mustang Mach-E · loss of drive power

“Vehicle experienced immediate loss of motive power while in motion at 45 mph after "Stop Safely Now" alert.”

2021 Ford Mustang Mach-E · waits for recall repairs

“the dealer refused to replace the windshield and perform the recall repair on the vehicle.”

NHTSA Defect Investigations

Linked federal ODI safety probes (3)

View all EV investigations →
Open EA25001 Engineering Analysis
NHTSA ODI filing ↗

Collisions Involving Ford BlueCruise

On April 25, 2024, NHTSA’s Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE24012) to assess BlueCruise, a partial driving automation system available on certain vehicles manufactured by Ford Motor Company (Ford). NHTSA opened the investigation after the agency received notice of two fatal collisions involving BlueCruise-equipped Ford Mustang Mach-E vehicles. Based on the incidents, NHTSA scoped the investigation to 2021-2024 Mustang Mach-E vehicles equipped with BlueCruise. In June 2024, ODI sent an Information Request (IR) letter to Ford requiring that it provide certain information pertaining to crashes, non-crash reports, and technical specifications that relate to BlueCruise, as well as other Ford partial driving automation systems that offer lane and speed maintenance. In its response to ODI’s IR, Ford stated that there are 2,539,962 Ford and Lincoln vehicles (including subject and peer vehicles) equipped with a partial driving automation system within the scope of the request. The majority of these vehicles are equipped with a system that Ford calls Lane Centering Assist (LCA), which is a hands-on partial driving automation system that combines longitudinal control authority governed by Adaptive Cruise Control (ACC) and lateral control authority governed by a steerable path. LCA is offered on a wide range of Ford and Lincoln models beginning in model year 2019. Vehicles that are equipped with BlueCruise, the focus of this investigation, have LCA capability and additionally offer hands-free partial driving automation when certain conditions are met. Hands-free BlueCruise operation is only offered on certain roadways and system availability is geofenced using vehicle GPS. BlueCruise-equipped vehicles employ a camera-based driver monitoring system to determine driver attentiveness to the roadway. BlueCruise was introduced in model year 2021 and is currently available in a select range of Ford and Lincoln vehicles. For BlueCruise- and LCA-equipped vehicles, both ACC and Pre-Collision Assist (PCA) features use a combination of camera and radar sensing technologies to detect and classify objects. ACC is specifically designed to detect vehicles (including cars, trucks, and motorcycles) and bicycles in front of the subject vehicle which are either stationary or moving in the same direction as the subject vehicle. Through this investigation, limitations in the detection of stationary vehicles in certain conditions have been identified. Specifically, due to the potential for false detection of stationary objects at long distances, Ford designed ACC to inhibit any response to reported stationary objects when the subject vehicle’s approach speed is at or above 62 mph. Additionally, system performance may be limited when there is poor visibility due to insufficient illumination. In addition to reviewing Ford’s response to ODI’s IR, the agency conducted a review of crash and non-crash reports identified collectively through Ford’s IR response, incident reporting through Standing General Order 2021-01 (SGO), and NHTSA vehicle owner questionnaires. In total, 32 crashes and 2,004 non-crash reports on subject and peer Ford vehicles were identified across manufacturer and ODI data sources. A detailed analysis of each crash was conducted including the review of any available police reports, photographs, data recovered from in-vehicle event data recorders, connected vehicle data, and/or other information. In both fatal collisions referenced in the PE24012 opening resume, the subject Ford Mustang Mach-E vehicle was traveling over 70 mph on a controlled-access highway during nighttime lighting conditions with hands-free BlueCruise engaged when it collided with a stationary vehicle. Analysis of data imaged from the vehicles’ event data recorders demonstrates that in each incident, the driver did not apply the brakes or take evasive steering action, and no deceleration was initiated by either the BlueCruise system or PCA prior to impact. Through the agency’s crash analysis, four additional frontal collisions were identified where the subject Ford impacted a stopped or slow-moving lead vehicle or another stationary object located in the travel lane. Two of these four incidents involved BlueCruise-equipped Ford Mustang Mach-E vehicles (included in the failure report summary along with the fatal collisions discussed above), while the other two involved other Ford models equipped with the LCA system. Additionally, a trend was identified through analysis of the non-crash reports relating to allegations that ACC (the longitudinal component of both BlueCruise and LCA) failed to detect and/or respond to a stopped or slow-moving lead vehicle. In these reports, consumers often describe that the absence of deceleration initiated by ACC was unexpected and required harsh manual braking or intervention from the PCA to avoid a frontal collision with the lead vehicle. Based on NHTSA’s analysis, system limitations relating to the detection of stationary vehicles while traveling at highway speeds and in nighttime lighting conditions appear to be factors in collisions under investigation and several apparently similar near-miss, non-crash reports. This Engineering Analysis (EA) is being opened to further investigate these system limitations and to evaluate drivers’ ability to respond to scenarios that exceed system limitations. During the EA, the agency expects to, among other things, perform vehicle evaluations, review additional technical information, and perform additional analysis of related crashes and non-crash reports. The crashes included in the failure report summary can be found at NHTSA.gov under the following SGO report identification numbers: 502-7268, 502-7426, 502-6852, 502-8738.

Closed PE24012 Preliminary Evaluation
NHTSA ODI filing ↗

Collisions Involving Ford BlueCruise

On April 25, 2024, NHTSA’s Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE24012) to assess BlueCruise, a partial driving automation system available on certain vehicles manufactured by Ford Motor Company (Ford). NHTSA opened the investigation after the agency received notice of two fatal collisions involving BlueCruise-equipped Ford Mustang Mach-E vehicles. Based on the incidents, NHTSA scoped the investigation to 2021-2024 Mustang Mach-E vehicles equipped with BlueCruise. In June 2024, ODI sent an Information Request (IR) letter to Ford requiring that it provide certain information pertaining to crashes, non-crash reports, and technical specifications that relate to BlueCruise, as well as other Ford partial driving automation systems that offer lane and speed maintenance. In its response to ODI’s IR, Ford stated that there are 2,539,962 Ford and Lincoln vehicles (including subject and peer vehicles) equipped with a partial driving automation system within the scope of the request. The majority of these vehicles are equipped with a system that Ford calls Lane Centering Assist (LCA), which is a hands-on partial driving automation system that combines longitudinal control authority governed by Adaptive Cruise Control (ACC) and lateral control authority governed by a steerable path. LCA is offered on a wide range of Ford and Lincoln models beginning in model year 2019. Vehicles that are equipped with BlueCruise, the focus of this investigation, have LCA capability and additionally offer hands-free partial driving automation when certain conditions are met. Hands-free BlueCruise operation is only offered on certain roadways and system availability is geofenced using vehicle GPS. BlueCruise-equipped vehicles employ a camera-based driver monitoring system to determine driver attentiveness to the roadway. BlueCruise was introduced in model year 2021 and is currently available in a select range of Ford and Lincoln vehicles. For BlueCruise- and LCA-equipped vehicles, both ACC and Pre-Collision Assist (PCA) features use a combination of camera and radar sensing technologies to detect and classify objects. ACC is specifically designed to detect vehicles (including cars, trucks, and motorcycles) and bicycles in front of the subject vehicle which are either stationary or moving in the same direction as the subject vehicle. Through this investigation, limitations in the detection of stationary vehicles in certain conditions have been identified. Specifically, due to the potential for false detection of stationary objects at long distances, Ford designed ACC to inhibit any response to reported stationary objects when the subject vehicle’s approach speed is at or above 62 mph. Additionally, system performance may be limited when there is poor visibility due to insufficient illumination. In addition to reviewing Ford’s response to ODI’s IR, the agency conducted a review of crash and non-crash reports identified collectively through Ford’s IR response, incident reporting through Standing General Order 2021-01 (SGO), and NHTSA vehicle owner questionnaires. In total, 32 crashes and 2,004 non-crash reports on subject and peer Ford vehicles were identified across manufacturer and ODI data sources. A detailed analysis of each crash was conducted including the review of any available police reports, photographs, data recovered from in-vehicle event data recorders, connected vehicle data, and/or other information. In both fatal collisions referenced in the PE24012 opening resume, the subject Ford Mustang Mach-E vehicle was traveling over 70 mph on a controlled-access highway during nighttime lighting conditions with hands-free BlueCruise engaged when it collided with a stationary vehicle. Analysis of data imaged from the vehicles’ event data recorders demonstrates that in each incident, the driver did not apply the brakes or take evasive steering action, and no deceleration was initiated by either the BlueCruise system or PCA prior to impact. Through the agency’s crash analysis, four additional frontal collisions were identified where the subject Ford impacted a stopped or slow-moving lead vehicle or another stationary object located in the travel lane. Two of these four incidents involved BlueCruise-equipped Ford Mustang Mach-E vehicles (included in the failure report summary along with the fatal collisions discussed above), while the other two involved other Ford models equipped with the LCA system. Additionally, a trend was identified through analysis of the non-crash reports relating to allegations that ACC (the longitudinal component of both BlueCruise and LCA) failed to detect and/or respond to a stopped or slow-moving lead vehicle. In these reports, consumers often describe that the absence of deceleration initiated by ACC was unexpected and required harsh manual braking or intervention from the PCA to avoid a frontal collision with the lead vehicle. Based on NHTSA’s analysis, system limitations relating to the detection of stationary vehicles while traveling at highway speeds and in nighttime lighting conditions appear to be factors in collisions under investigation and several apparently similar near-miss, non-crash reports. This Preliminary Evaluation is being upgraded to an Engineering Analysis (EA25001) to further investigate these system limitations and to evaluate drivers’ ability to respond to scenarios that exceed system limitations. During the EA, the agency expects to, among other things, perform vehicle evaluations, review additional technical information, and perform additional analysis of related crashes and non-crash reports. The crashes included in the failure report summary can be found at NHTSA.gov under the following SGO report identification numbers: 502-7268, 502-7426, 502-6852, 502-8738.

Closed RQ23004 Recall Query
NHTSA ODI filing ↗

High Voltage Battery Contactor Failure

On August 17, 2023, the Office of Defects Investigations (ODI) opened RQ23-004 to investigate instances of loss of motor power due to overheating high voltage battery contactors in model year (MY) 2021-2022 Ford Mustang Mach-E vehicles (subject vehicles). This Recall Query (RQ) was opened after receiving 12 consumer complaints alleging a high voltage battery main contactor failure in subject vehicles that were included in Recall 22V-412 and remedied prior to the reported incidents. The remedy in 22V-412 was a Secondary On-Board Diagnostic Control Module (SOBDMC) software update to monitor contactor temperature and reduce battery power to prevent damage to the contactor, and a Battery Energy Control Module (BECM) software update to monitor contactor resistance to identify an overheated contactor and reduce vehicle power to prevent further damage. On October 13, 2023, Ford filed Recall 23V-687 of 34,762 2021-2022 Ford Mustang Mach-E vehicles produced from May 27, 2020 to May 24, 2022 with recalled Bussed Electrical Center parts NK48-10C666-AA, NK48-10C666-BA, or LK98-10C666-AB. Affected vehicles are equipped with the extended range battery. Ford stated that preexisting damage to the contactors caused by heat and accumulated wear may reduce the effectiveness of the software update remedy in 22V-412. The remedy of 23V-687 is to complete a replacement of the Bussed Electrical Center, or High Voltage Battery Junction Box. In addition, Ford stated that subject vehicles equipped with standard range batteries, in comparison to vehicles equipped with extended range batteries, are less at risk of experiencing this failure due to their smaller battery capacity and lower output electric drive motors. In view of the recall action taken by Ford, ODI is closing this investigation. ODI will continue to monitor reports of this failure in both extended range and standard range models. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.

04 · Used Buyer Checklist

What to verify by VIN before buying used

1

Confirm HVBJB hardware replacement vs. software-only remedy by VIN

Early recalls initially shipped software monitoring before later campaigns replaced the physical High-Voltage Battery Junction Box assembly on extended-range and GT builds. Ask a Ford dealer for the OASIS repair history.

2

Weigh 2021 against later model years carefully

TrimIndex flags the 2021 Mustang Mach-E as a year to avoid based on age-matched NHTSA complaint volume, while naming 2024 the cleanest judged model year.

3

Check 12-volt battery age and replacement history

A weak 12-volt AGM battery on early Mach-E builds can prevent doors from opening or trigger false high-voltage faults. Verify whether the 12-volt battery has been replaced recently.

4

Inspect DC fast-charging behavior and sustained highway acceleration

Contactor overheating historically appeared after repeated DC fast charges or hard full-throttle pulls. Confirm clean fast-charge handshakes and zero Stop Safely Now warnings.

Frequently asked questions

Which model years are covered in ford mustang mach-e hvbjb contactor & battery recalls?

In TrimIndex’s NHTSA recall files through Nov 12, 2026, matched campaigns (22V412000, 23V687000, 25V130000, 25V441000, 26V582000) span 2021–2025 model years. Exact eligibility depends on the vehicle’s production date and 17-character VIN.

Do any of these recalls carry Park-Outside or Do-Not-Drive warnings?

None of the matched campaigns currently carry an active NHTSA Do-Not-Drive or Park-Outside flag in TrimIndex’s stored recall table through Nov 12, 2026, though recall remedies and inspection steps still apply until completed.

What should used buyers watch for on the Mustang Mach-E?

TrimIndex flags Ford Mustang Mach-E (2021) as years to avoid on complaint volume, while 2024 Ford Mustang Mach-E stands out as the cleanest judged year. A used unit with verified VIN-level recall completion and documented service history carries materially lower risk than an unremediated unit.

How do I verify recall completion on a specific used VIN?

Run the 17-character VIN at nhtsa.gov/recalls and ask the selling dealer for the OEM warranty/service printout confirming whether software updates, component inspections or full hardware replacements were completed.